MONTEVERDE - Pen Flush - Fountain Pen Cleaner

Guaranteed to remove old, stubborn grime buildup from fountain pens with the perfect balance of ingredients. Get your fountain pen writing like new again!

Instructions:

1. Clean a fountain pen with distilled or tap water until the water runs clear.

2. Fill and rinse your fountain pen with Monteverde USA® Pen Flush, repeating the procedure to remove any excess ink.

3. Fill and rinse with clean water again to remove any remaining Pen Flush.

Keeping your fountain pen clean is essential for optimal performance and a long lifespan. This step-by-step guide will help you use a Monteverde® Pen Flush to thoroughly clean your fountain pen.

Step-by-step instructions

Step 1: Disassembling the fountain pen

Carefully unscrew the body and separate the nib and feeder from the fountain pen section. If your fountain pen has a cartridge or converter, remove it as well.
Note: If your fountain pen warranty does not allow disassembly, refer to the manufacturer's cleaning instructions.

Step 2: Measure the pen cleaning fluid

Use the desired amount of pen cleaning fluid (usually 18-20 ml) and pour it into a cup or bowl.
Make sure to measure on a flat surface for accurate measurement.

Step 3: Soak the pen components (optional)

Pour the cleaning liquid into a cup or bowl.
Soak the disassembled pen components in pen cleaning fluid and let them soak for a few minutes. This will help remove stubborn ink residue.

Step 4: Rinse with clean water

After cleaning with the pen cleaning solution, rinse all pen components with clean, warm water. This will remove any remaining cleaning solution.
Be sure to rinse well to avoid leaving any pen cleaner behind.

Step 5: Dry the pen components

Gently dry the pen components with a lint-free cloth or paper towels to remove excess water.
Let all parts air dry completely before reassembling the pen.

Step 6: Reassemble the fountain pen

Once all the parts are completely dry, reassemble the pen in the correct order.
Make sure everything is secure but not too tight.

Step 7: Test the fountain pen

Test the pen on a piece of paper to make sure the ink flows smoothly. This will confirm that the cleaning process was successful.

Additional tips

Cleaning the kit: After use, clean the measuring cup, brush, and pipette with soap and water, then dry them thoroughly.
Storage: Store kit components in a safe, dry place for future use.

Note: Use ONLY as directed. Do not reuse for any other purpose.

Warning

• Do not drink. Do not inhale directly. Keep away from eyes, open flames, and out of reach of children and pets. Wash skin thoroughly after handling. Ensure adequate ventilation during cleaning. Do not mix with any other solution. Do not mix with bleach.
• If swallowed: Rinse mouth. Do not induce vomiting.
  In case of contact with skin (or hair): Remove all contaminated clothing immediately.
• Rinse your skin with water or shower.
• If inhaled: Remove the person to fresh air and keep comfortable for breathing.
• In case of eye contact: Rinse cautiously with water for several minutes.
• Remove contact lenses, if present and easy to do. Continue rinsing.
• Go to the emergency room immediately.
• Wash contaminated clothing before reuse.

----------------------

Guaranteed to remove the old and stubborn build-up in fountain pens with the perfect balance of ingredients. Makes your pen write like new again!

Instructions:

1. Clean a fountain pen with distilled or tap water until the water runs clear.

2. Fill and flush your fountain pen with Monteverde USA® Pen Flush, repeating to remove any extra ink.

3. Fill and flush with clean water again to remove any remaining Pen Flush.

Keeping your fountain pen clean is essential for optimal performance and longevity. This step-by-step guide will help you use a Monteverde® Pen Flush to clean your fountain pen thoroughly.

Step-by-Step Instructions

Step 1: Disassemble the Fountain Pen

• Carefully unscrew the barrel and separate the nib and feed from the pen's section. If your pen has a cartridge or converter, remove it as well.
• Note: If your pen's warranty does not allow disassembly, consult the manufacturer's cleaning instructions.

Step 2: Measure the Pen Flush

• Use desired amount of pen flush (normally 18-20 ml) and pour into a cup or a bowl.
• Ensure you're measuring on a flat surface for accuracy.

Step 3: Soak the Pen Components (optional)

• Pour the flush into a cup or a bowl.
• Submerge the disassembled pen components into the pen flush and let them soak for a few minutes. This will help break down stubborn ink residues.

Step 4: Rinse with Clean Water

• After cleaning with the pen flush, rinse all pen components with clean, lukewarm water. This will remove any residual cleaning solution.
• Ensure you rinse thoroughly to avoid any lingering pen flush.

Step 5: Dry the Pen Components

• Gently pat the pen components with a lint-free cloth or paper towels to remove excess water.
• Allow all parts to air-dry completely before reassembling the pen.

Step 6: Reassemble the Fountain Pen

• Once all parts are completely dry, reassemble the pen in the correct order.
• Make sure everything is secure but not overly tight.

Step 7: Test the Fountain Pen

• Test your pen on a piece of paper to ensure the ink flows smoothly. This will confirm that the cleaning process was successful.

Additional Tips

• Cleaning the Kit : After use, clean the measuring cup, brush, and pipette with soap and water, then dry thoroughly.
• Storage : Store the kit components in a safe, dry place for future use.

Note: ONLY use as directed. Do not repurpose for any other use.

Warning

• Do not drink. Do not breathe in directly. Keep away from eyes, from open fire, out of reach of children and pets . Wash skin thoroughly after handling. Ensure proper ventilation during cleaning. Do not mix with any other solution. Do not mix with bleach.
• If swallowed : Rinse mouth. Do NOT induce vomiting.
• If on skin (or hair): Take off immediately all contaminated clothing.
• Rinse skin with water/shower.
• If inhaled: Remove person to fresh air and keep comfortable for breathing.
• If in eyes: Rinse cautiously with water for several minutes.
• Remove contact lenses, if present and easy to do. Continue rinsing.
• Immediately go to ER
• Wash contaminated clothing before reuse.